Setting The Clock Time - Sangean DAR-101 Mode D'emploi

Setting the Clock and Date

Setting the clock time

The clock display of DAR-101 can be set to 12 or 24 hour format.
1. Press the Menu button while the recorder is switched on.
2. Rotate the Tuning control until SYSTEM SETUP is highlighted,
and press the Enter button to enter the setting.
3. Rotate the Tuning control until TIME & DATE is highlighted, and press
the Enter button to enter the setting. Rotate the Tuning control until
TIME is highlighted, and press the Enter button to enter the setting.
4. Rotate the Tuning control until TIME FORMAT is highlighted,
and press the Enter button to enter the setting. Rotate the Tuning
control to select either 12 or 24 hour format as desired. Press the
Enter button to confirm the setting, and the display will revert to the
previous setting.
5. Rotate the Tuning control until TIME SET is highlighted, then press
the Enter button to enter the setting. While the hour digit is flashing,
rotate the Tuning control to select the appropriate hour as shown on
the display. Press the Enter button when you finish the setting.
6. Rotate the Tuning control to select the appropriate minute as shown
on the display while the minute digit is flashing. Press the Enter
button to confirm the setting.
GB
12