Toro 51619 Mode D'emploi page 3

Safety and Instructional Decals
Important:
Safety and instruction decals are located near areas of potential danger. Replace damaged or missing decals.
Setup
Register your product at www.Toro.com so that Toro can notify
you in the case of a safety or warranty product recall.
1. Blower tube
2. Bottom inlet cover
Figure 2
3. Upper-vacuum tube
4. Lower-vacuum tube
127-2265
Assembling the Blower
Important:
The motor should not run unless the bottom
inlet cover is locked in place.
Note:
If the motor runs without the bottom inlet cover in place,
do not use the appliance. Return it to an Authorized Service
Dealer.
Install the blower tube and bottom inlet cover.
g224170
2
decal127-2265
g227713