Festo VIFB12 Serie Notice Simplifiee page 11

VIFB12 - 03/05
1
User instructions
The fieldbus node 12 for valve terminals type 03..05 is de-
signed exclusively for use as a slave on the Omron Sysmac-
Bus. The limit values of the technical specifications must be
observed.
Please refer to the "Pneumatics manuals" P.BE MIDI/MAXI-...
and P.BE ISO-... and the "Electronics manual" P.BE VIFB12-
03/05... for detailed information.
WARNUNG:
• Switch off the power supply before you connect or
disconnect plugs (danger of functional damage).
• Connect a protective earth conductor with sufficient cross
section to the connection marked with
valve terminal is not fitted on an earthed machine stand.
PLEASE NOTE
Only operate a valve terminal which is completely fitted and
electrically wired.
9709 NH
, if the
11