Heater Safety Distances And Sensor Position - Helo RING WALL D Manuel Produit

Installation and User Manual
3. Install the heater wall mounts with the included
4,2 x 32mm screws (4x), as per the image.
Install the heater on the wall.
4. Install the lower wall mount bolts.
Tighten the upper bolts also.

2.9 Heater safety distances and sensor position

Minimum distances for the
mounting (mm)
Drill. Ø3,5 mm
Image 2 Heaters installation
(mm)
OLET 19
*) Absolute measure of
40mm from ceiling
Image 3 Heater safety distances and sensor position to wall
Ring Wall D
210
B
*) 40 mm
A 445 A
Screw 6 x 40 (2kpl)
Screw 6 x 16 (2kpl)
*) Absolute measure of
40mm from ceiling
(mm)
*) 40 mm
OLET 19
350 D
7