Audio-Technica M2 Installation Et Utilisation page 4

M2 Wireless In-Ear Monitor System – Introduction
Thank you for buying the Audio-Technica M2 Wireless In-Ear Monitor
System.
System Features
• High-fidelity sound with clean, articulate mix allows you to
hear yourself better at lower volumes
• 100 selectable UHF channels
• Up to 10 simultaneous systems per frequency band
• Three receiver modes: Personal Mix, stereo, and mono
• Personal Mix Control allows you to adjust your own mix on stage
• 3.5 mm line-in jack connects to ambient microphone, click
track & more
• LED indicators provide easy-to-read level monitoring
• XLR loop output (true pass-through) connects signal to mixing
console, additional IEM system or recording device with no
signal degradation
• Adjustable squelch eliminates annoying static
Note: M2 "L " Band receivers must be used only with "L " Band
transmitters; the same holds true for M2 "M," "E," and "F" Band
receivers and transmitters. For multiple-channel applications, as
many as ten systems may be used together per frequency band.
• Pilot tone protects against RF interference when the transmitter
is turned off
• Limiter (defeatable) helps protect your hearing from sudden
peaks
• Portable system is quick to load and set up
• Reduces on-stage audio clutter for better overall mix & less
feedback
• Use any number of M2R Stereo Receivers on the same frequency
• Audio-Technica earphones with proprietary dynamic driver
offer full frequency response and outstanding isolation
• Earphones feature personal fit with 3 sizes of rubber eartips plus
an ear-conforming foam tip