Bridge Mode - Alto Professional TMX160DFX Guide D'utilisation Rapide

With the AMPLIFIER MODE switch in BRIDGE position the two power amplifiers drive
together a single speaker cabinet with the sum of the power of the 2 amps. This is
commonly used to drive a single subwoofer and the main output on the front panel is used
to feed a pair of powered speakers.
EFFECTS LIST
# PRESET
1 VOCAL 1
2 VOCAL 2
3 LARGE HALL
4 SMALL HALL
5 LARGE ROOM
6 SMALL ROOM
7 PLATE
8 TAPE REVERB
9 SPRING REVERB
10 MONO DELAY
11 STEREO DELAY
12 FLANGER
13 CHORUS
14 REVERB+DELAY
15 REVERB+FLANGER Stereo flanger effect with room reverb.
16 REVERB+CHORUS

Bridge Mode

DESCRIPTION
Reverb, simulating a room with a small delay time.
Reverb, simulating a small space with a small delay
time.
Reverb, simulating a large acoustic space.
Reverb, simulating the acoustics of a stage space.
Reverb, simulating a studio with many early reflections.
Reverb, simulating a bright studio room.
Simulates bright plate reverb.
Simulates classic tape delay created by multiple
playback heads.
Simulates the lightly stretched sound of spring reverb
from analog transducers.
Reproduces the signal after a small period of time.
Reproduces the signal after a small period of time with a
slight difference between the two stereo channels.
Classic stereo flanging effect, similar to a jet plane
taking off.
Simulates the full, complex, watery sound of several
instruments playing the same thing.
Delay effect with room reverb.
Stereo chorus effect with room reverb.
Main Speaker
8
PARAMETER RANGE
Decay time 0.8~1.1s
Pre-delay 0~79ms
Decay time 0.8~2.5s
Pre-delay 0~79ms
Decay time 3.6~5.4s
Pre-delay 23~55ms
Decay time 1.0~2.9s
Pre-delay 20~45ms
Decay time 2.9~4.5s
Pre-delay 23~55ms
Decay time 0.7~2.1s
Pre-delay 20~45ms
Decay time 0.6~6.1s
Pre-delay
Decay time 1.3~5.4
Pre-delay 0~84ms
Decay time 1.3~5.4s
Pre-delay 0~84ms
Delay period 60~650ms
Delay period 210~400ms
Feedback 37~73%
Rate 0.16~2.79Hz
Rate 0.5~5Hz
Delay period 211~375ms
Reverse decay time 1.0~2.9s
Flanger rate
0.16~2.52Hz
Reverse decay time
Chorus rate 0.5~4.74Hz
Reverse decay time 1.5~2.9s
10ms