Robert Juliat SULLY 305L Notice De Demarrage Rapide page 4

5 Operation
2
6 DMX Chart
Mode 1:
DMX Channel
Dimmer8B
1 Dimmer
2
3
4
5
6
Robert Juliat reserves the right to change or alter any of the items detailed on this page, to increase or improve manufacturing techniques without prior notice.
1 Switch on the luminaire by connecting power cable.
2 Control parameters can be set by using the RDM (through
DMX connectors) or Ethernet (RJ45) or locally by using the
display and controls (option).
Light intensity can be controlled by DMX
(see section 6: DMX Chart).
3 Beam size can be set by using the focus knob.
1
Focus
3
Mode 2: Mode 3:
Dimmer16B Profile8B
Dimmer Dimmer
Dimmer fine Strobe duration
Strobe speed
Response time
Control mode
2
RDM
Mode 4:
Profile16B
Range min
Dimmer
0
Dimmer fine
1
Strobe duration
Strobe speed
Range min
Response time
0
Control mode
Range min
0
1
Range min
0
1
11
21
(*) Function activated after 5 seconds
- needs to go back to zero to activate second function.
EN - 4 -
Setup
Local
Web
control
interface
(Display & controls option)
Default IP address:
Available on ID plate
Strobe duration
Range max Function
0 Strobe OFF
255 Strobe ON - 1 ms T 20 ms
Strobe speed
Range max Function
255 Frequency: 0,1 Hz T 10 Hz
Response time
Range max Function
0 OFF
255 Response time: 0,1 s T 4 s
Control mode*
Function
Range max
By default
If activated in web interface/RDM
0 -
10 -
20 -
30 -
EN
-
RDM Disable
RDM Enable
RESET DEVICE