Siemens SITRANS P500 Notice De Service page 20

Closing the device
②⑤
1. Screw the covers
2. Secure each cover with the cover catch
①
3. Close the key cover
4. Tighten the screws in the key cover.
5. Check the tightness of the blanking plugs
①
Key cover
②
Cover (front), optionally with inspection window
③
Door contacts (front and rear)
Optional: The installed cover catches depend
on the type of protection.
Figure 4-2 View of the transmitter: Left: Front right: View from rear
5 Commissioning
5.1 Basic safety instructions
DANGER
Toxic gases and liquids
Danger of poisoning when the device is vented.
If toxic process media are measured, toxic gases and liquids can be released when the device is vented.
● Before venting ensure that there are no toxic gases and liquids in the device. Take the appropriate safety measures.
18
back on as far as they will go.
③
.
.
④
and cable gland
⑥
in accordance with the degree of protection.
④
Blanking plug
⑤
Cover (rear) for electrical terminal compartment
⑥
Cable gland
SITRANS P500 with HART
A5E02344532-03, 04/2013