Publicité
Les langues disponibles
Les langues disponibles
The installation and maintenance operations have to be
realised only by qualified persons.
Please, contact your department or the company which
is in charge of maintenances.
Before setting up the water cooler
Water supply : a stopcock with a female ¾ (20/27) output has
to be located at the left or the right near the water cooler.
Electricity supply : a 220 Volt plug with a 10 A circuit breaker
has to be located at the left or the right near the water cooler.
Our water coolers maximum working pressure is between 3
and 4 bars at the most.
NB:
We strongly recommend the installation of a pressure re-
gulator and a water block (safe protection against flooding) on
the water supply tap.
The guide has been redacted on the cold/cook water version.
An indication will direct you to additional steps for the hot and
sparkling water versions.
Have a good installation!
21
Publicité
