Order Of The Data In The Callers List; Saving The Data In The Callers List; Indication Of "New Calls; Deleting Data In The Callers List - Telenet 305 Mode D'emploi

12. 2 Order of the Data in the Callers List

Order of the Open the
data in the callers list via
callers list the oldest call
by means of
"Ü"
Serial number
The serial number of the call will be displayed in the top right-hand corner.

12.3 Saving the Data in the Callers List

If the Callers List is empty and a call is received, the "Ken-je-beller
number 1 to this call in the Callers List. The next call will obtain serial number 2. When the
Callers List is full (45 calls) and a new call comes in, the oldest call (no. 1) will automatically be
deleted from the list. All other calls will move up so that the new call can be stored under
serial number 45.

12.4 Indication of "New Calls"

The number of new calls that came in appears on the display. When the data in the Callers
List is consulted, new calls will be indicated by an "N". When the call has been looked at, the
"N" will disappear and the call will no longer be considered as "new". An answered call will
be included in the Callers List, but will not be considered a new call and will not receive an
"N" indication.
12.5 Deleting Data from the Callers List
Deleting a specific call :
• Press the "Û" or " Ü" key to open the Callers List.
• Press the "Wissen" key.
• "WISSEN?" is displayed.
• Press the "OK" key to confirm that you want to delete this specific call.
• All calls following the deleted call move up one place in the Callers List.
Deleting the entire Callers List :
• Press the "Û" or " Ü" key to open the Callers List.
• Keep pressing the "Wissen" key until "ALLES WISSEN ?" is displayed.
• Press the "OK" key to confirm that you want to delete the entire Callers List.
Remark :
If there are still new calls (which were not looked at yet) in the Callers List, these will not be deleted when the entire
list is deleted. These are kept in the Callers List.

12.6 Redialing a Number from the Callers List

• Press the "Û" or " Ü" key to select the call.
• Press the "OK" key to confirm your choice and to dial the number.
Oldest call
01 02
49
Last
received
call
... 44 45
®
" data will locate serial
Open the
callers list via
the last call by
means of
"Û"