Installation - Telenet 305 Mode D'emploi

2 Installation

• "Tel. lijn"
Plug the telephone line cord in the "Tel.lijn" jack at the back side of the phone.
Plug the other end of the telephone line cord into the telephone wall outlet.
Connect the handset to the phone by means of the supplied coiled cord.
The jack is in the left side of the phone.
• Adapter 9VAC ~ 400mA (Model: V35–09A–400)
Insert the small plug of the supplied adapter in the jack at the back side of the phone.
Then plug the adapter in the power outlet.
• Battery
It is important to install a battery in the phone so that all data in the memory of the phone
are kept in case of a power failure.
Only install a 9V battery. When the battery is empty or no battery is installed in the phone,
the Empty Battery Indicator will appear on the display.
To install the battery :
- Open the battery cover in the under side of the phone (with a small screw-driver).
Connect the 9V battery and insert it in the battery compartment;
- Close the battery cover;
- The Empty Battery Indicator will disappear from the display. If not, check the battery
connection or replace the battery with a new one.
Note
Always make sure that the adapter is plugged in during the installation or replacement of the battery !!
Always use the phone with the adapter plugged in, otherwise the battery will be empty and will have to be re p l a c e d
s oo n e r.
41