Leda Victoria Notice D'installation Et Utilisation page 12

Instructions for operation
Congratulations.
We are delighted that you have chosen this
product by Leda, designed and built using the
most sophisticated technology.
This appliance is functional and reliable, and will
give you all the pleasure and benefi ts of a truly
relaxing hydromassage.
With your new Leda shower box, you can select
the intensity of each of the jets using the spe-
cially-designed controls in order to obtain the
effect that you fi nd most soothing or invigorating
- a splendid hydromassage tailored exactly to
your desire.
1
Using the hydraulic controls
The 4-way thermostatic tap unit makes operation
practical, simple and quick.
Start by adjusting the temperature of the water,
by turning the knob (B) of the thermostatic mixer
to the left or to the right. The knob features a
special anti-scalding safety device.
Select the "foot-level jet" by turning the function
A
knob (A) clockwise to the vertical position as
shown in the fi gure opposite.
At this point, to start delivery of the water, simply
turn the deviator function knob (A) counter-
clockwise.
Place a foot beneath the column to check whether
the temperature of the water is as desired.
After setting the temperature, select the hand-
B
held shower by turning the function knob (A)
clockwise until the mark is aligned with the new
function.
If the knob is turned counter-clockwise, the water
will be directed to the hand-held shower head and
you can enjoy a wonderfully tonic shower, ideal
to relieve the stresses of a long day.
If you wish to experience the pleasurable sen-
sations of the other functions, simply turn the
function selector knob (A).
Four hydromassage functions can be selected:
1) - hand-held shower.
2) - main shower head.
3) - 5 vertical jets.
4) - 2 vertical jets.
Two functions can be selected simultaneously
by turning the function selector knob (A) to the
intermediate position.
Uso Victoria - Code 10011699 - Edition 1 - 01/2008
Jet nozzles
2
To orient the jets in the desired direction and thus
obtain a perfectly personalized massage, simply
turn the nozzle as shown in the fi gure.
3
Routine maintenance
The shower column is built using materials
which are easy to clean and inhibit the build-up
of bacteria on the surface.
It is advisable to clean the appliance regularly,
preferably using the specifi c products for each
type of operation; these products are avail-
able from our authorized dealers and Service
Centres.
If you prefer to use other products, the following
recommendations should be followed:
1) Always use a soft cloth; never use abrasive
2) Never use powder detergents. Always use
3) Never use acetone, ammonia or products
4) Stubborn stains can be removed using
No
No
5) To remove scale stains from the surface, use
4
Special maintenance
The manufacturer recommends that users
contact the nearest authorized service centre
for all maintenance operations.
12
cleaning products (pads etc.).
good-quality liquid detergents which contain
no alcohol or ammonia.
containing these substances, as these can
seriously damage the shower column. Simi-
larly, never use products containing formic
acid or formaldehyde.
liquid detergent, silver polish or toothpaste
(depending on the type of stain) and rubbing
gently with a soft cloth.
lemon juice or vinegar (hot if possible) and
rub gently with a soft cloth.
English