Fujitsu LIFEBOOK UH572 Ultrabook Première Mise En Marche page 3

Initial Start Up
AC Adapter
Power/suspend/Resume Button
1. Open the Display Panel
2. Connect AC Power
3. Booting the System
4. Starting Windows
DC Power
Jack
Power Cord
5. Connect to the Internet or Network
6. Activate Additional Utilities,
• Ensure that your LIFEBOOK is on a hard level surface and
that the air vents are not blocked.
• Lift the display, being careful not to touch the screen.
• Adjust the display until it is at a comfortable viewing angle.
• Plug the power cord into the AC adapter.
• Plug the AC adapter into your Ultrabook.
• Connect the power cord to an electrical outlet.
• We strongly recommend that you not attach any
external devices until you have gone through the
initial power on sequence.
• Press the Power/Suspend/Resume button.
• The Ultrabook is now on and the battery is being charged.
• W hen you turn on your Ultrabook for the first time, it will
display a Fujitsu logo on the screen. If you do nothing
the system will load the operating system, and then the
Windows Welcome will begin.
®
• A fter you boot up the system the first time and follow the
instructions on the screen, you will eventually come to
the Sign-In screen which prompts you for your User name.
After the Sign-in Screen appears, the screen will black
out for up to several minutes. This is normal. DO NOT
ATTEMPT TO POWER DOWN THE SYSTEM AT THIS POINT.
While the screen is blacked out, your system configuration
is being set up and the necessary files are being installed.
• D uring the course of the first start up, you will need to read
and accept the End User License Agreements (EULAs) for
Microsoft and Fujitsu.
You cannot use your Ultrabook until you have
accepted the license agreement. If you stop the
process your Ultrabook will return to the beginning
of the Windows Welcome Process, even if you
®
shut your Ultrabook down and start it up again.
• F ollowing first boot, you will arrive at the New Windows
UI start screen. Some useful shortcuts for your reference:
Press the Windows + D key to go to traditional Windows
desktop. Press Windows + M key to load the traditional
Windows desktop and minimize all applications.
• Turn on wireless by pressing the Function (Fn) and F5 key.
• Register your LIFEBOOK with Fujitsu Service and
Support via our website (us.fujitsu.com/computers).
This helps us to better serve you.
Applications, & Drivers
• Double-click the Fujitsu "BonusApps" icon on your desktop
to access bonus software applications which you can
install. You can select all, a few, or none.
• Go to the Fujitsu support site (http://solutions.us.fujitsu.
com/www/content/ support/) to download Fujitsu Software
Download Manager (FSDM). It can be used to download
the latest drivers.
for the First Time
®
3