Télécharger Imprimer la page

Schneider SCGS26 Notice D'utilisation page 27

Publicité

Les langues disponibles

Les langues disponibles

 Temperature indicator
When the iron is heating up, the temperature indicator will light up. Once the
iron has reached the selected temperature, it will extinguish. The
temperature indicator will illuminate solidly during heating.
 Steam trigger
When the appliance is heated to the selected temperature and the
temperature indicator will extinguish, press the steam trigger with a little
force, the steam will be sprayed from the soleplate. When loosen the steam
trigger, the appliance can only be used for dry ironing without steam.
 Clean button (with indicator)
1. The appliance must be cleaned when the clean indicator lights solidly.
Before perform cleaning, prepare a container with a capacity of more than
300ml for collecting the waste water, then put the appliance on the
container and place the container steadily.
2. Hold and press the "Clean button" for 2 seconds. When the buzzer
sounds, the operator should keep away from the appliance to avoid being
burnt by high-temperature steam during the cleaning process. And the
appliance enters into the cleaning mode and the clean indicator blinks.
After about 3 minutes, the cleaning is completed and the appliance
returns to the working condition.
NOTE:
• For better cleaning, please ensure that the temperature dial be turned to
"MAX" setting before activate the "Clean function. The cleaning may be not
so good or cannot be performed if the temperature dial is turned to other
temperature settings except "MAX" setting.
• Before activate the "Clean" function, please ensure that the appliance shall
be at the "Steam" mode. And please press the "Steam trigger" once to make
the water spray button return to its original position if the appliance is not at
the "Steam" mode. The appliance will spray water during cleaning if the
appliance is performed cleaning under the "Water Spray" mode. The
appliance must be performed cleaning under the "Steam" mode.
 Shot of steam
Shot of steam can be activated after pressing the steam trigger twice
continuously.
EN-9

Publicité

loading