Publicité
Les langues disponibles
Les langues disponibles
5. Assembly Instructions
LAMP-USER INTERFACE
1- START/STOP BUTTON
To start and stop the illumination period.
The lamp will emit a sound indicating the start of the illumination.
2- POWER INDICATOR
Indication of battery state:
While operating:
Solid green: battery full
Blinking green: battery below 50%
Blinking yellow: < 4 illumination cycles left
While charging:
Yellow LEDs: Charging mode on
Solid yellow and blinking white LEDs:
At least one cycle available. Each bar represents 20% of battery capacity.
Solid green and solid white LEDs: battery full
3- TIME/BATTERY LEVEL INDICATOR
TIMER
When the illumination period starts the TIMER/BATTERY LEVEL INDICATOR is fully lit and the
countdown starts. Each bar represents 24 seconds of the remaining time for a total of 2 minutes
illumination period.
BATTERY LEVEL
When the illumination period stops, the lamp emits a double ''beep'' sound and the
TIMER/BATTERY LEVEL INDICATOR will flash to indicate the battery level. Each illuminated
flashing bar represents around 20% of charge.
4- AUDITORY SIGNALS
An audible beep sounds when the illumination period starts.
An audible beep sounds when the illumination period finishes.
The lamp emits a distinguishable beep when shut down manually.
An audible beep sounds when the battery is empty.
An audible beep sounds when the battery or LEDs are hot (Front window will not exceed more
than 50°C / 122°F).
An audible beep sounds when the battery is fully charged.
An audible beep sounds when charging starts.
An audible beep sounds when charging stops.
Publicité
