Candy GVW 585 TWC-S Notice Et Mode D'emploi page 40

l
Once the programme has been selected
the indicator light will automatically show
the stain level set for that programme.
l
Selecting a different stain level the
relevant indicator will light up.
EXTRA RINSE button
l
This button allows you to add rinses at
the end of the washing cycle. The
maximum number of extra rinses is
related to the programme selected.
l
This function has been studied for the
people with delicate and sensitive skin,
for which also a least residue of detergent
can cause irritations or allergies.
l
It advises to also use this function for the
children items and in case of washings of
very dirty items, for which it is due to use
a lot of detergent, or in the washing of
toweling items whose fibres mostly have
the tendency to hold the detergent.
OPTIONS button
You can choose between three different
options:
- PREWASHING
l
This option allows you to make a prewash
and it is particularly useful for heavily
soiled loads (can be used only on some
programmes as shown in the table of
programmes).
l
We recommend you use only 20% of the
recommended quantities shown on the
detergent pack.
- HYGIENE
l
With this option it is possible to hygienize
the clothes, the washing programme
reach a temperature of 60°C.
- NIGHT CYCLE
l
This option reduces the intermediate spin
speed to 400 rpm, where applicable,
increase the water level during rinsing and
keep the laundry immersed in water after the
final rinse, in order to spread the fibre
sevenly.
l
During the phase in which the water is
held in the tub, the relevant indicator light
blink to show that the machine is at a
standstill.
l
Deselect the option to end the cycle with a
spin dry (which may be reduced or cancelled
using the appropriate button) and emptying
phase.
l
Thanks to electronic control, the water
in the intermediate phases is emptied
silently, making this option very useful for
washing at night.
DRYING SELECTION button
l
Ensure that the programme selector is
not in the OFF position then press the
button to select the required drying
programme: an indicator will light to
display the drying result selected each
time you press the button.
l
To cancel the selection before the start of
a drying programme, press the button
repeatedly until the indicators go out or
return the programme selector to the OFF
position.
l
To cancel the cycle during the drying
phase, hold the button down for about 3
seconds until the cooling indicator lights
up.
l
Given the high temperature inside the
drum, we recommend that you allow the
dryer to complete the cool down period
before returning the programme selector
to the OFF position and removing the
laundry.
40