Installation - Candy GVW 585 TWC-S Notice Et Mode D'emploi

2. INSTALLATION

Cut the tube straps, being careful
l
not to damage the tube and
power cord.
Unscrew the 2 or 4 screws (A) on
l
the back and remove the 2 or 4
shims (B) as illustrated in figure
1.
Close the 2 or 4 holes using the
l
plugs included in the instruction
envelope.
If the washing machine is built-in,
l
after cutting the hose straps,
unscrew the 3 or 4 screws (A)
and remove the 3 or 4 shims (B).
In some models, 1 or more
l
shims will fall inside the machine:
tilt the washing machine forward
to remove them. Close the holes
using the plugs found in the
envelope.
WARNING:
keep packaging materials away
from children.
Place the polionda sheet on the
l
bottom as shown in figure 2
(according to the model, consider
version A, B or C).
1
2
A
1
B
C
2
32
A
A
B
B
A
A
B
B
3
2
3
1