Fisher & Paykel AquaSmart WL37T26C Instructions D'installation Et Guide De L'utilisateur page 12

Installation instructions
10
Levelling your washer
It is IMPORTANT to level the washer to ensure good spin performance and effective detergent and
bleach dispensing.
Separate the 4 rubber foot inserts from the moulding and fit into the feet on the base of
1
the washer.
Move the washer to its final position. (We suggest a minimum clearance of 1" (25 mm) each side).
2
Adjust the feet so the washer is level and cannot rock.
3
Adjustable feet
Rubber insert
Fig.5 Levelling your washer
Use the walls and adjacent counter tops as a sight guide to check to see if washer appears level.
4
Readjust the feet if necessary.
Open the lid and check the washer tub to see that it sits slightly forward of centre. (See Fig. 7).
5
Turn on the water and check all hose connections for leaks. Make sure there are no kinks in the hoses.
6
Uncoil power cord and plug into wall socket.
7
Check for leaks, noise, vibration, correct water temperatures and proper operation in spin. Check
8
that the lid locks during spin.
Incorrect
adjustment
Fig. 7
1" (25 mm) 1" (25 mm)
Fig.6 Minimum clearances
Correct
adjustment