Usage Of Installation, Usage And Maintenance Manual; Check Of Heat Pump Water Heater; Safety Precautions - LEGALLAIS HB200 Manuel De Mise En Service, D'opération Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

_________________________________ ___EN__________________________________35
allowed to perform any maintenance or repair work on the cooling circuit, using
adequate equipment.
8.2.

Usage of installation, usage and maintenance manual

WARNING!
Improper installation may cause personal injuries or injuries in animals or
damage to objects. The manufacturer shall undertake no responsibility for
these injuries or damages.
The person performing installation or putting into operation the appliance is
obliged to comply with the instructions of this manual. After finishing the installation,
the person performing installation is obliged to inform and train the user on the
operation of the water heater and on proper execution of the operations.
8.3.

Check of heat pump water heater

During handling the appliance or opening the packaging, please, follow the
instructions explained in points 1.4 and 1.5 of chapter GENERAL INFORMATION
carefully.
During the removal of the packaging, please, check whether the appliance is
intact and whether all required parts are included in the package.
8.4.

Safety precautions

The explanation of the symbols used in the table below is described in
details in point 1.3, chapter GENERAL INFORMATION.
warning
Protect connection pipes and
1.
wires from any possible damage.
Ensure that the location of
installation and any system to
which the appliance is connected
fully comply with effective
2.
relevant regulations.
Use manual tools and equipment
adequate to the purpose (it is
especially important to ensure
that the tools are not used up,
their handles are intact and fixed
3.
safely). Use tools and equipment
in a proper way, so that they can
not fall down from above. Put the
tools and equipment back into
their places after use.
Use electric equipment adequate
for the purposes. Use the
4.
equipment properly. No feeder
danger
Danger of electric shock
caused by touching the parts
under power.
Flood caused by water leaking
from damaged pipes.
Electric shock caused by
touching the parts that are put
into operation improperly or
that are under power.
Damage of the appliance
caused by improper operation
conditions.
Personal injury caused by
flying chips or spills, dust
inhalation, hit, cut or stabbed
injuries or bruises.
Damage of the appliance or
surrounding objects caused by
falling chips, beating or cutting.
Personal injury caused by
flying chips or spills, dust
inhalation, beaten, cut or

Publicité

Chapitres

Table des Matières
loading

Table des Matières