Publicité
Les langues disponibles
Les langues disponibles
NOTE: Continuous use in two speed range is not recommended. It may damage the
EC switch and should be avoided.
FORWARD / REVERSE LEVER
A forward/reverse lever determines the direction of the tool and also serves as a lock
off button. To select forward rotation, RELEASE THE EC SWITCH (see Fig. 1A),
and push the forward/reverse lever (see Fig. 2B), toward left side of the tool. To select
reverse, push the forward/reverse lever, toward right side of the tool. The centre
position of the control button locks the tool in the off position. When change the
position of the control button, making sure the trigger is released.
NOTE: The first time the tool is run after changing the direction of rotation, you may
hear a click on start up. This is normal and does not indicate a problem.
BUILT-IN LED LIGHT
A built-in LED light can illuminate the work area and improve vision when driving in
areas with insufficient light.
ELECTRIC BRAKE
The EC switch is equipped with a circuit design electric of brake function. The tool
will consistently operate to quickly stop rotating after the EC switch release.
TORQUE ADJUSTMENT IN FORWARD ROTATION (CW) ONLY
1English1
A
FIG. 1
B
FIG. 2
English
-11
Publicité
