Reloop sPod platinum Mode D'emploi page 8

ASSEMBLY
1. Screw the shaft into the base.
2. Screw the washer all the way onto the shaft.
3. Screw the microphone mount onto the shaft by three or
four turns until it is centered over the base of the stand.
Tighten the microphone mount by rotating the washer
counterclockwise until secured.
4. Insert the Reloop sPod Platinum mounting
threads into the microphone mount.
Make sure the Reloop sPod Platinum logo
on the front is facing you when stand
is tilted upward.
FUNCTION SWITCHES
LED INDICATOR POWER ON > BLUE MUTE > RED
Headphone volume control
Rotating left to right > volume min. to max.
Microphone Mute
Press the control knob to mute the microphone.
PC/MAC & MIC MON.
MIC/Mon. > Real time monitoring when speaking
PC/Mac > Headphones output
You can plug your headphones directly into
the Reloop sPod Platinum to monitor your recording
without the latency that often occurs when monitoring
through a computer's headphones jack. To
monitor through your Reloop sPod Platinum, plug your
headphones into the headphone jack on the
back of the microphone.
Note:
When switching to PC/Mac mode, you can either listen to the music playing or the playback of your recording.
4
3
2
1
BACK
Headphones output 3.5 stereo jack
USB PORT
FRONT