Fisher & Paykel DCS HD30 Instructions D'installation page 19

Internal blower installation in one of the following three options:
Option 1: Internal blower, front installation for venting left, right or down
Disconnect the cable from inside the downdraft unit. Plug in that same cable
● ●
from the downdraft unit into the internal blower Fig.7.
Turn the venting collar on the internal blower box to the desired direction – left,
● ●
right or down.
Mount the internal blower box to the housing using four screws Fig.8.
● ●
Continue to the 'Prepare for electrical connection' section on page 20.
● ●
Fig.7
Option 2: Internal blower, back installation for venting left, right or down
The internal blower box can also be installed on the back of the downdraft unit
● ●
to accommodate the installation of a cooking range, range top or wall oven /
cooktop in front of the downdraft unit.
Remove the large cover on the back of the downdraft unit Fig.9.
● ●
Turn the venting collar on the blower box to the desired direction - left, right or
● ●
down. Disconnect the cable from inside the downdraft unit. Plug in that same
cable from the downdraft unit into the internal blower and mount the blower box
to the housing using four screws Fig.10.
When finished, mount the previously removed cover onto the front of the
● ●
downdraft unit Fig.11.
Continue to the 'Prepare for electrical connection' section on page 20.
● ●
Fig.9
INSTALLATION INSTRUCTIONS
Fig.10
Fig.8
Fig.11
EN
17