WINTERIZING yOUR LAGHETTO
The pool can't be winterised if the water isn't completely clean.
These are the procedures for a proper winterising.
One or two days before covering the pool you must proceed
to the "winterising treatment"
The chlorine must be always poured into the skimmers with the pump switched on.
During this phase let the filters run stop.
Lower the water level under the white border.
When you close the pool switch off the filtration system disconnect it and remove it
from the pool.
If you have filters with fixed skimmers you must remove the floating head, empty
the skimmer from the filters, take away the external pipes and the pump and close
the inlet and suctins fitted with the their caps.
If you can remove the whole skimmer from the pool.
We recommend drying completely the pumps and put them in a sheltered, dry and
airy place till next summer.
Once removed the filtration system cover the pool with the dedicated Laghetto®
winter cover.
DISASSEmBLy yOUR LAGHETTO
The pool should be disassembled with the water is still clean.
These are the procedures for a propen disassembly:
1. Remove the filtration system with the Skimmer and the wall fittings as above
described.
2. Empty the pool siphoning the water with the vacuum pipe, unscrewing the wall
suction fitting on the bottom; otherwise using a submerged pump.
44