Laghetto CLASSIC POP 0 Notice De Montage page 42

12. Turn around the white poles thus
bringing near the two ends and in-
sert the junction in the other end
of the little transparent PVC pipe.
13. Once assembled the pool, pull each oval ver-
tical white pole B and stretch the bottom of
the pool in order to remove all the fold.
The pool should have a regular polygonal
shape.
14. Mount the wall fittings to the pool
and connect the fitting-pipes
(pool – filtration system)
as in the specific instructions.
15. Start filling up the pool till the water has reached at least the middle of the
white border.
42