Yamaha mLAN16E Mode D'emploi page 14

• If you connect/disconnect the LAN, USB or the cables to the mini jacks terminals on the Macin-
tosh you are using when using mLAN, some noise may be caused and/or data may be cut off.
Make sure that you do not insert or unplug any connections when using mLAN.
• Is the number of audio channels appropriate? The amount of audio channels that can be used
simultaneously differs depending on the computer capacity and speed.
• Is the sampling rate (wordclock) appropriate? A high sampling rate can be the cause of the
noise depending on the computer capacity and speed.
• Make sure that the appropriate number of devices is connected to the computer. Connection
of too many devices may cause noise, depending on the capacity of the computer.
• Are there any noise-producing devices (such as those containing power inverters, etc.) near the
cables? Move all cables away from any possible noise sources.
• Make sure the mLAN cable is not damaged. Cables that do not satisfy IEEE1394 standards may
cause noise.
• Do not run applications, such as anti-virus software, in the background. While using the mLAN
system, turn off all applications that run in background. If these applications remain on, driver
operation may become unstable and cause noise. If you do not plan to use the mLAN system,
you can turn these applications on. (You can turn the mLAN driver on and off using mLAN
Manager.)
■ Insufficient tracks for recording or playback
• Is the number of channels for mLAN audio receiving/sending (set on the mLAN Auto Connec-
tor and mLAN Graphic Patchbay) appropriate?
■ Unable to transfer MIDI data or Program Changes
• Make sure the correct connectors have been selected.
• Are the mLAN cables connected correctly?
• An mLAN cable may be broken.
• Is the power turned on for the transmitting and receiving devices?
• Make sure the transmission and reception channels match.
■ Incorrect pitch
• Is the unit operating on the same sampling frequency as the synchronized external device?
• Is the master device operating in a stable way?
■ Unable to communicate via mLAN
• Has the driver been installed? ................................................... Refer to the Installation Guide.
• Is the mLAN cable properly connected? Check the connection; disconnect the mLAN cable
once, then insert it again.
• (For Windows) Is mLAN set to "ON"? From the task bar, right click on the mLAN Manager
icon.
14
.......Refer to "Connecting a Computer to an mLAN device via mLAN" in the
Installation Guide and "mLAN Connection Settings" in the mLAN Graphic
Patchbay Online Manual.
.......Refer to "Connecting a Computer to an mLAN device via mLAN" in the
Installation Guide and "mLAN Connection Settings" in the mLAN Graphic
Patchbay Online Manual.
.......Refer to "Connecting a Computer to an mLAN device via mLAN" in the
Installation Guide and "mLAN Connection Settings" in the mLAN Graphic
Patchbay Online Manual.
...........................Refer to the owner's manual for the mLAN16E-equipped device.
.......Refer to "Connecting a Computer to an mLAN device via mLAN" in the
Installation Guide and "Wordclock Settings" in the mLAN Graphic Patchbay
Online Manual.
.............................Refer to "Confirming the installation" in the Installation Guide.