Important Safety Instructions - Schneider LED32-SCPX200H Manuel D'utilisation

To reduce the risk of fire or electric shock, do not expose this
product to water, rain or moisture. To prevent the risk of electric
shock, do not remove the cover or back of this product. In case
of product failure, only qualified personnel can repair. There
are no user-serviceable parts inside.
CAUTION !
Dangerous tension inside the product ! Do not open. Risk of electric
shock ! No parts can be repaired by the end-user. Only qualified personnel
can repair and maintain this product.
If the electric cord is damaged, it must be replaced by the manufacturer or
qualified after-sales personnel in order to avoid any danger.
The product must be installed in accordance with local laws.
Damaged batteries must be properly disposed. In order to protect the
environment, please dispose the batteries properly, in accordance with local
laws (information is available at your reseller). Remote control batteries (not
included) shall not be exposed to excessive heat (e.g. from sun or fire).
Where to install the product
- Place the product on a straight, rigid and stable place. Do not place the
product on a carpet.
- Do not place the product on top of another that may cause overheating
(for example, a receiver or amplifier).
- Do not place anything underneath the product (for example, CDs or
magazines).
Proper ventilation
- Place the product in a sufficientlyaerated place to avoid overheating. Allow at
least 10cm spacing at the back and top of the product, and 5cm spacing on
both sides to prevent overheating.
- Do not place items such as newspapers, tablecloth, curtains, in front of the
ventilating openings.

Important safety instructions

35