Ottobock 17PA1 WR Serie Instructions D'utilisation page 13

► Use the product on only one patient.
► Observe the maintenance recommendations.
CAUTION
Unallowable use of lubricants
Risk of injury and loss of functionality as well as damage to the product
► The product is designed to be free of lubricants. Avoid contact with
lubricants (e.g. grease, oil).
► After contact with lubricants, promptly clean the product or parts of the
product with a degreasing cleaning agent (e.g. acetone or isopropyl
alcohol).
NOTICE
Contact with saltwater or water containing chlorine/soap, fresh
water or abrasive substances (e.g. sand)
Damage and premature product wear
► Following any contact with the substances identified above, promptly
clean the product in accordance with the section "Cleaning".
NOTICE
Exposure of the product to unsuitable environmental conditions
Damage, brittleness or destruction due to improper handling
► Avoid storage in condensing ambient humidity.
► Avoid contact with abrasive substances (e.g. sand, dust).
► Do not expose the product to temperatures below -10 °C (14 °F) or
above +60 °C (140 °F) (e.g. sauna, excessive sunlight, drying on a
radiator).
5 Preparation for use
INFORMATION
► Check the exact parallel alignment of the system joints before deliver­
ing the orthosis.
INFORMATION
In order to facilitate the parallel alignment of the system joints, each pair of
system joints is supplied with an adjustment aid. The adjustment aid con­
13