Care & Cleaning
Motor base
To clean the motor base, wipe with a soft, damp
cloth then dry thoroughly. Wipe any excess food
particles from the power cord.
Cleaning agents
Do not use abrasive scouring pads or cleansers
on either the motor base or the jug, as they may
scratch the surface. Use only warm soap water
with a soft cloth.
Stubborn food stains and odours
Strong smelling foods such as garlic, fish and
some vegetables such as carrots may leave
an odour or stain the bowl or lid.
To remove, pour warm soapy water and fill
to the MAX LIQUID mark. Set aside to soak for
5 minutes, without immersing the whole bowl.
Then wash with a mild detergent and warm
water, rise well and dry thoroughly. Store the
bowl with the lid off.
Storage
Place the large food pusher (with medium and
small pushers inserted) into the feed chute
for storage.
Store your food processor upright, with the
bowl and lid resting in position, but not locked.
Locking the bowl and lid can put unnecessary
strain on the safety interlock.
All accessories should be kept in the storage
container and out of the reach of children to
avoid accidental cuts. It is not recommended to
store the discs in a drawer with other utensils.
Do not place anything else on top of your food
processor during storage.
20