Ryobi RPT4545E Traduction Des Instructions Originales page 4

SERVICE
■ Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
POLE HEDGE TRIMMER SAFETY WARNINGS
■ Keep all parts of the body away from the cutter
blades. A moment of inattention while operating the
product may result in serious personal injury.
■ Carry the pole hedge trimmer by the handle with
cutter blade stopped. When transporting or storing
the pole hedge trimmer always fit the cutting device
cover. Proper handling of the pole hedge trimmer will
reduce possible personal injury from the cutter blades.
■ Hold the power tool by insulated gripping surface
only, because the cutter blade may contact hidden
wiring or its own cord. Cutter Blades contacting a
"live" wire may make exposed metal parts of the power
tool "live" and could give the operator an electric shock.
■ Keep cable away from cutting area. During operation
the cable may be hidden in shrubs and can be
accidentally cut by the blade.
ADDITIONAL SAFETY WARNINGS
■ Clear the work area before each use. Remove all
objects such as cords, lights, wire, or string which can
be thrown or become entangled in the cutting means.
■ Electrical power should be supplied via a residual
current device (RCD) with a tripping current of not more
than 30 mA.
■ If the power cable becomes damaged, you must return
the tool to an authorised service centre for repair or
replacement.
■ Beware of thrown objects; keep all bystanders, children,
and pets at least 15 m away from work area.
■ Check constantly for persons or animals behind or
inside any hedge or bush you intend to trim.
■ Do not operate in poor lighting. The operator requires a
clear view of the work area to identify potential hazards.
■ Inspect the machine before each use. Check for loose
fasteners, etc. Make sure all guards, and handles are
properly and securely attached. Replace any damaged
parts before use.
■ Do not modify the machine in any way.
■ Do not allow children or untrained individuals to use this
unit.
■ Wear full eye and hearing protection while operating the
product. If working in an area where there is a risk of
falling objects, head protection must be worn.
■ Wear heavy long trousers, boots, and gloves. Do not
wear loose fitting clothing, short trousers, jewellery of
any kind, or use with bare feet.
■ Secure long hair so it is above shoulder level to prevent
entanglement in moving parts.
■ Do not use this machine when you are tired, ill, or under
the influence of alcohol, drugs, or medication.
■ Keep firm footing and balance. Do not overreach.
2 | English
Overreaching can result in loss of balance and can
result in serious injury.
■ Before starting the machine, make sure the cutting
blades will not come in contact with anything.
■ While operating the pole hedge trimmer, always hold it
firmly with both hands by the two handles and ensure
that the operating position is safe and secure. The
manufacturer does not recommend the use of steps or
ladders.
■ Use the harness if it is supplied with your pole hedge
trimmer. It will assist you to support the weight of the
product during use and whilst moving between trimming
positions. Carefully adjust the harness to fit comfortably.
■ Identify the quick release mechanism and practice
using it before you start using the machine. Its
correct use may prevent serious injury in the case of
an emergency. Never wear additional clothing over
the harness or otherwise restrict access to the quick
release mechanism.
■ To protect yourself from electrocution, do not operate
within 10 m of overhead electrical lines.
■ Never use the pole hedge trimmer near fencing, posts,
buildings, or other immovable objects.
■ Blades are sharp. When handling the blade assembly,
wear non-slip, heavy-duty protective gloves. Do not
place your hand or fingers between blades or in any
position where they could get pinched or cut. Never
touch blade or service unit with the power cord
connected to the supply.
■ Switch off and disconnect from the power supply before:
● adjusting the working position of the cutting device
● cleaning or clearing a blockage
● leaving the product unattended
● checking, maintenance or working on the product.
■ Do not force the pole hedge trimmer through heavy
shrubbery. This can cause the blades to bind and slow
down. If the blades slow down, reduce the pace.
■ Do not attempt to cut stems or twigs that are larger
than 20 mm thick, or those obviously too large to feed
into the cutting blade. Use a non-powered hand saw or
pruning saw to trim large stems.
■ Use of hearing protection reduces the ability to hear
warnings (shouts or alarms). The operator must pay
extra attention to what is going on in the working area.
■ Do not operate the pole hedge trimmer with damaged
or excessively worn blades.
WARNING
If the machine is dropped, suffers heavy impact or begins
to vibrate abnormally, immediately stop the machine and
inspect for damage or identify the cause of the vibration.
Any damage should be properly repaired or replaced by
an authorised service centre.
WARNING
Check that all the shaft couplings on the extension pole
and tool are securely fastened before each use and at
frequent intervals.