Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Reparaturanleitung / Repair instructions /
2.2
Replace the electronic board SMD
a
Correct wiring of the safety switches is very important for the
safety of user. Old units need replacement of the safety switches.
Art.Nr.
Bezeichnung
1120.930
GT Spezial Gabelschlüssel SW8
Mode d'emploi pour la réparation
Rotor Gastronom GK900 / GK600
Dismounting the electronic board SMD
Mounting the electronic board SMD
Designation
GT special spanner AF8
Warning! Spare part
with safety function!
- Remove base plate.
- Place the special fork wrench
(1120.930) between the commutator
and frame over the milled faces of the
motor shaft.
- Loose the hexagonal nut over the fan
with a wrench (size 11mm), turn to right
(clockwise). Attention left-threaded!
- Remove the fan and the electronic board
SMD (Torx 10).
- Component is fitted in the reverse
sequence to removal.
Désignation
GT clé à fourche spéciale
REP-GK900-1127-1-DE-EN-FR
St/
Qte
9
1
Publicité
Table des Matières
