Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
WARNING!
Electrical wiring must be done by qualified person(s) in accordance with all applicable
codes and standards and the unit must be grounded.
Electrical connection
5
Run three wires, two for the power supply and one for the ground wire, from the
●
●
power connection box on the ventilation hood to a power connection point near
the installation.
Open the power connection box on the ventilation hood and secure the power
●
●
conductor with a cULus listed strain relief (not included).
Connect the power conductors to the conductors for the ventilation hood, black to
●
●
black and white to white.
Connect the grounding wire (green or bare) to the ground conductor (green) of the
●
●
ventilation hood power connection box.
Secure all the connections with cULus listed wire nuts.
●
●
Replace the power connection box cover.
●
●
Gray
4 speed
Black
3 speed
Red
2 speed
Blue
1 speed
Brown
(neutral)
16
INSTALLATION INSTRUCTIONS
Black/Noir (L)
White/Blanc (N)
Green/Vert (E)
120V~60Hz
M
Black/Noir
Black/Noir
Bornier
Junction
Capacitor
Box
Green/Vert
White/Blanc Motor
Orange/Orange Motor
Publicité
Table des Matières
