Color Filter - Canon Speedlite 600EX-RT Mode D'emploi

o Color Filter
When the color temperature of the Speedlite and the color temperature
of the light illuminating the subject are different, unnatural colors may
result for the subject background where the flash does not reach.
By using a supplied color filter suitable for the color temperature of the
illuminating light while firing the flash, you can shoot the subject and
background colors with an appropriate white balance. You can also use
commercially-available color filters.
Supplied Color Filters
Filter
Tungsten light
(orange)
Compensation
Density
Effect
Low Low
High High
Attach the filter to the holder.
1
Attach the supplied filter to the holder
as shown in the illustration.
Attach the holder to the Speedlite.
2
Attach the holder to the flash head as
shown.
The flash icon on the LCD panel
changes to < o >.
To remove the holder, follow the
procedure in reverse order. Raise the
lower filter attachment pins and
remove the holder from the flash
head.
Take the picture.
3
To compensate for the color
temperature of the light source, set
the camera's white balance to <Q>
and take the picture.
Application
Compensates for the
effect of a tungsten light
bulb
39