Futurelight PHW-260 Mode D'emploi page 40

(1) Omega-holders
(2) Clamp
(3) Safety-rope
(4) Quick-lock fastener
Screw one clamp each via a M12 screw and nut onto the Omega-clamps.
Insert the quick-lock fasteners of the first Omega-clamp into the respective
holes on the bottom of the device. Tighten the quick-lock fasteners fully
clockwise. Install the second Omega-clamp.
Before taking into operation for the first time, the installation has to be approved by an expert!
DANGER TO LIFE!
40/108 51838705_V_1_0.DOC