Maintenance And Cleaning; Maintenance; Cleaning - IBS VacuSafe Mode D'emploi

9. Maintenance and

cleaning

9.1 Maintenance

Special maintenance and care is not necessary.
If the aspiration or dispensing power falls off, filter and tub-
ing on the pump side should be replaced.
9.2 Cleaning
Danger: Disconnect VacuSafe from the power
supply before cleaning.
Warning: When reassembling subsequent to
cleaning, ensure that the tubes are properly connect-
ed. If connected wrongly, VacuSafe will aspirate
when in the dispense mode and possibly damage the
instrument.
Warning: Chlorine solutions and other aggressive
chemicals may affect operation of the equipment. In
order to avoid damage in the long term such chemi-
cals should not be left inside the system for any
lengthy period.
Pump / sensor cable:
Dirt and contamination can be removed using a
●
moist cloth and either warm or warm soapy water
or with 70% alcohol. Use a lint-free cloth or a
brush.
Never use caustic solutions such as nitro diluent or
●
similar.
Never attempt to scrape off residues
●
Never attempt to flame off residues.
●
Bottle and lid
The bottle and complete lid, without sensor cable, can be
cleaned as glassware. bottle and lid may also be cleaned in
dishwasher.
Warning: Remove the sensor cable before placing in
the dishwasher; it may otherwise be damaged
beyond repair.
25