Display / Keyboard - IBS VacuSafe Mode D'emploi

2.2 Display / keyboard

MODE
SELECT
PRESSURE ∆ P
VACUUM
P
10
mbar
SENSOR READY
1 Display pressure/vacuum in mbar (minus sign in
the case of vacuum)
2 LED READY: lights when set pressure/vacuum in
the bottle is within set range
3 LED SENSOR: active only (blinks) in aspiration
mode (VACUUM):
when medium reaches maximum level in the
●
bottle and the bottle has to be emptied
when the sensor cable is not properly connected
●
4 Keys UP and DOWN for setting hysteresis and
pressure/vacuum and switching off level monitor
5 SELECT key: for setting hysteresis (∆P) or
pressure/vacuum (P) and calibration level monitor
6 MODE key: for switching between the modes
"aspirate" (VACUUM) and "dispense"
(PRESSURE).