Specifications - Franklin Electric SubMonitor Manuel D'installation Et D'exploitation

Specifications

Electrical
Input Voltage
Frequency
Motor SF (Max) Amps Range
Maximum Conductor Size Through
Sensors
Measurement Accuracy *
Voltage
Current
Trip Time - Locked rotor, underload,
overload, overheat, unbalance,
overvoltage, undervoltage
Input Current, L1, L2, L3
Control Circuit Rating
Signal Circuit Rating
Agency Approvals
Standards Met
Surge
Electrical Fast Transient
ESD
Mechanical
Dimensions (WxHxD)
Base Unit
Display Unit
Total Unit
Weight
Base Unit
Display Unit
Total Unit
Operating Temperature Range
Storage Temperature Range
Relative Humidity
Protection Class
Display Unit
Base Unit
* When Strong radio frequency energy is present, SubMonitor measurement
accuracy (voltage and current) is ± 3%. Contact Franklin Electric technical
support for assistance with these types of installations.
16
3-Phase 190-600 VAC
50 Hz or 60 Hz
5 amps to 350 amps
0.92" diameter, #0000 AWG Max
23 mm diameter, 95 mm
1% ± 1 digit
1% ± 1 digit
3 seconds
0.15 amps
1.5 amp AC, up to 600 volts
1 amp AC, up to 250 volts
Incandescent lamp, 100 watts max
UL 508 classification NKCR, NKCR7 file
E160632
cUL
ANSI/IEEE C62.41
IEC 1000-4-4 Level 4, 4kV
IEC 1000-4-2 Level 3, 6kV
8.0" x 5.35" x 4.3" (20.3 x 13.6 x 10.9 cm)
7.0" x 3.0" x 1.4" (17.8 x 7.6 x 3.6 cm)
8.0" x 5.35" x 5.7" (20.3 x 13.6 x 14.5 cm)
46 oz (1.3 kg)
7 oz (0.2 kg)
53 oz (1.5 kg)
-20 °C to +60 °C
-30 °C to +80 °C
10-95% non-condensing
NEMA 3R
NEMA 1
gauge max
2