Starblitz SHARK200 Mode D'emploi page 8

EN
FR
ES
"C0" is automatic recognition mode. Use camera flash and release a test exposure.
The photocell detects the number of flashes the camera released and memorizes the
value automatically.
If you have selected «C1», the unit will autoflash immediately when another flash is
activated in the same area.
If you have selected «C2» the unit will autoflash on the second flash detected by the
photocell.
If you have selected «C3», the unit will autoflash on the third flash detected by the
photocell.
If you have selected «C4», the unit will autoflash on the fourth flash detected by the
photocell.
If you have selected «C5», the unit will autoflash on the fifth flash detected by the
photocell.
If you have selected «C6», the unit will autoflash on the sixth flash detected by the
photocell.
If you have selected «C7», the unit will autoflash on the seventh flash detected by
the photocell.
6
Press 4s
Press
UP or DOWN
button to adjust
preflashes from 1 to 7