Sharp EL-1611E Mode D'emploi page 6

Fig. 2
Fig. 1
4
98305_EL-1611E(LC7)_Eng.pm65
Cleaning the printing mechanism
If the print becomes dull after long time usage, clean the
printing wheel according to the following procedures:
1) Remove the printer cover and the ink roller.
2) Install the paper roll and feed it until it comes out of the front of
the printing mechanism.
3) Put a small brush (like a tooth brush) lightly to the printing wheel
and clean it by pressing
4) Put back the ink roller and the printer cover.
Fig. 3
Notes: • Never attempt to turn the printing belt or restrict its
movement while printing. This may cause incorrect printing.
• Do not rotate the printing mechanism manually, this may
damage the printer.
4
.
0.3.6, 1:24 PM