Dishwasher
Door may be ajar or not be properly
does not start.
latched.
No power to the dishwasher
(display won't come on). Fuse may
have been blown, circuit breaker
may have tripped, power cord may
have been unplugged or
dishwasher may have been turned
off.
Can't select a wash cycle since the
previous wash cycle may not have
finished or the dishwasher hasn't
been reset.
Delay start or Child lock may be
activated.
The door may have been closed
without selecting a wash cycle.
Water supply may not be turned on
or connected.
Wash cycle
The door has been open for more
won't resume
than 4 seconds after pressing the
after door was
Start button.
opened and
closed.
Display does
A fuse may have been blown or
not illuminate.
circuit breaker tripped.
Door not closed or latched.
Note:
top of the door, the display only
illuminates when the door is opened
and controls are visible.
For models with controls on
Troubleshooting en-us
Close door securely until door latch clicks.
Replace blown fuse or reset tripped circuit
breaker. Plug power cord into outlet
securely. Press the on/off button ( to
turn the dishwasher on.
Reset the dishwasher by pressing and
holding the START button for at least three
seconds.
Reset Delay start or Child lock functions
(refer to the appropriate section in this
manual).
Select a wash cycle and close the door.
Check and turn on water supply.
Press Start button again and close the
dishwasher door within 4 seconds (see
"Protection against unintentional operation"
section in this manual).
Check the fuse or circuit breaker box and
replace the fuse or reset the breaker if
necessary.
Ensure door is properly latched and
completely closed.
41