Main Unit (Rear Panel) - Onkyo SBT-A500 Mode D'emploi

> Before Start > Part Names

Main Unit (Rear Panel)


1. TUNER FM 75Ω jack: Connect the supplied antenna.
2. Wireless antenna: Raise for Wi-Fi connection or when using a BLUETOOTH enabled
device. The diagram shows the movable range for the wireless antenna. Do not try to
force it beyond this range otherwise you may break it.
3. AUDIO IN jacks: Input AV component audio signals with an analog audio cable.
4. DIGITAL IN OPTICAL jack: Input digital audio signals from a TV, for example, with a digital
optical cable.
5. SETUP MIC jack: The supplied speaker setup microphone is connected.
6. Power cord
7. ETHERNET port: Connect to the network with an Ethernet cable.
8. HDMI OUT jack: Connect a HDMI cable to transfer video signals and audio signals to a
TV.
9. HDMI IN jacks: Input video signals and audio signals with a HDMI cable connected to an
AV component.
10.SPEAKERS terminal: Connect the included sound bar using the included sound bar
connection cable.
6
> Install > Initial Setup
 
  
> Playback
 

Advanced Setup | Firmware Update | Others
 
90°
E
N

180°