Onkyo SBT-A500 Mode D'emploi page 47

> Before Start > Part Names
■ Video Select
When "TUNER", "NET", "USB", or "BLUETOOTH" input is selected, you can set the input
from which video is displayed on the TV.
Video Select "Last (Default Value)": Select the video input played immediately prior.
"BD/DVD", "CBL/SAT", "GAME", "STRM BOX", "CD", "TV": Play
the video from the selected input.
0 This setting is effective for an input selector which is assigned
in "1. Input/Output Assign" - "HDMI Input".
> Install > Initial Setup > Playback
5. Hardware
■ 1. HDMI
HDMI CEC Setting to "On" enables the input selection link and other link
functions with HDMI connected CEC compliant device.
"On": Use this function
"Off (Default Value)": Do not use this function
When changing this setting, turn off and then on again the power
of all connected components.
0 Depending on the TV set, a link may need to be configured on the TV.
0 Setting to "On" and closing the on-screen menu displays the
name of the CEC-compatible components and "CEC On" on
the display of this unit.
0 Power consumption in standby mode may increase if "On" is
set. (Depending on the TV status, the unit will enter the
normal standby mode.)
0 If you operate the volume dial on the unit when this setting is
"On" and audio is output from the TV speakers, audio will be
output also from the speakers connected to the unit. If you
want to output from only either of them, change the unit or TV
settings, or reduce the volume of the unit.
0 If abnormal operation occurs when you set the setting to "On",
set it to "Off".
0 When connecting a non-CEC compatible component, or when
you are not sure whether it is compatible, set the setting to
"Off".
Advanced Setup | Firmware Update | Others
E
N
47