Supply Voltage - LERICA LEVAC C30 M8 Mode D'emploi Et D'entretien

VACUUM CHAMBER
PACKAGING MACHINES
The machines basically consist of the following parts:
• a stainless steel chamber (vacuum chamber) (C) inside which vacuum is created and bags are sealed by means of sealing bars (D); it is fitted with
a transparent plexiglas cover (A) that can be opened, and through which the operating phases can be observed. The depth
inside the chamber may be changed using plastic insertion plates (B) supplied with the machine;
• a stainless steel casing (E) with the control panel and main switch located on the front, and the back is closed by a stainless steel panel.
• a high-performance vacuum pump lubricated in recirculation with glass window (F) for checking the oil level;
• an air evacuation system consisting of unions, pipes and solenoid valves which connects the vacuum chamber to the pump and the system
adjustment and/or control organs;
• an electrical system which includes the power board with fusebox, control and connections board. All the functions are controlled by a
microprocessor.
D
A
B
E
5.2

SUPPLY VOLTAGE

5.2.1 230V SINGLE-FASE POWER SUPPLY
The appliances are provided with a standard 2P+T-10/16A German plug for connection to the electricity mains. Insert the plug in a compatible power
socket supplied by the mains.
ELECTRIC HAZARD! Before making the connection, always check to make sure the
electrical features of the system in the installation area are suitable.
REV. 00 - Cod.: 1500228
C
•
•
•
•
•
F
37
INSTALLATION
•
Fig. 1
Operation and maintenance manual / Ed. 10 - 2005
GB
GB