Listening To The Satellite Radio - JVC KW-XR810 Manuel D'instructions

Changing HD Radio reception
mode
While receiving an HD Radio broadcast, the unit
receives digital or analog audio automatically
due to the receiving condition.
While listening to an HD Radio station...
1
[Hold]
2
] <Tuner> ] <Blend Hold> ]
<Auto / Analog / Digital>
lights up when holding the digital
reception or flashes when holding the
analog reception.

Listening to the satellite radio

Before operating, connect either one of the following systems (not supplied) to the expansion
port on the rear of this unit.
For listening to a SIRIUS Satellite radio:
• SC-C1 and KS-SRA100
• PnP, SC-VDOC1 and KS-SRA100
For listening to an XM Satellite radio:
• JVC Smart Digital Adapter (XMDJVC100)
• CNP2000UC and CNPJVC1
• For details, refer also to the instructions supplied with the other components.
GCI (Global Control Information) update
• If channels are updated after subscription, updating starts automatically. The following appears
and no sound can be heard:
– For SIRIUS Satellite radio: "Updating"
– For XM Satellite radio: "UPDATING"
• Update takes a few minutes to complete.
• During update, you cannot operate your satellite radio.
• If no sound can be heard with <Auto>,
change the setting to <Analog> or <Digital>.
• The setting automatically changes to <Auto>
if you tune in to or change to another station,
or if you turn off the power.
• This setting cannot take effect for the
conventional FM/AM stations.
• If the radio station forces the reception
mode to digital or analog, the
indicator lights up.
or
ENGLISH 23