Technical Information; Possible Installation Options; Conformity / Manufacturer's Declaration; Imprint - Loewe bild 3 Mode D'emploi


Loewe bild 3
Operating manual 2
Technical information / Possible installation options
Conformity / Manufacturer's declaration / Imprint

Technical information

Notes on the LCD / OLED screen
The TV set with LCD screen or OLED screen purchased by you meets
the highest quality standards and has been checked for pixel errors.
Despite of thorough care when manufacturing the display, it cannot
be 100% guaranteed that no subpixel defects will occur due to tech-
nical reasons.
Please understand that these types of effects, as long as they are
within the limits specified in the standard (ISO 9241-307, fault class
II), cannot be considered as a device defect in terms of the guarantee.
For TV sets with LCD (1 :
Avoid displaying static images over a longer period. Image persistence
errors may arise.
For TV sets with OLED (2 :
Organic Light Emitting Diodes are an image technology based on
self-luminous pixels that offer clear benefits in terms of image quality
and performance.
Under certain conditions, persistent, one-sided loads on the OLED
material can result in persistence image faults which are irreversible.
Residual image issues can arise by using static image content over a
longer period, such as static images, subtitles or ticker displays, loop-
ing dia-shows or video sequences, static displays serving as presenta-
tion monitors or with video games, black bars in some screen formats.
These residual image issues are not defects within the meaning of
the warranty.
To minimise such issues, Loewe has developed a special algorithm
for detecting image content.
If static images are displayed for too long, the TV set automatically
switches to a screen-friendly contrast mode. After a new user oper-
ation, the device immediately returns to its normal state. In addition,
menu insertions are gradually reduced or displayed transparently
after one minute.
Under normal viewing conditions, such residual image issues do not
arise.
Information about connected USB hard drives
Switching off the TV set with the mains switch during operation or
an inadvertent disruption to the power supply (e.g. power failure)
can cause damage to the hard disk file system and hence loss of the
recorded broadcasts.
Never disconnect the USB storage device from the TV set during a
copy process. Before switching off the set with the mains switch, we
recommend you to switch it to standby mode.
If, contrary to expectation, you are still experiencing problems with the
operation of the hard drive, you can first carry out a test. In addition,
a formatting of the hard disk can be remedy. In the process, however,
all content on the hard disk is deleted. You can find the corresponding
menu items under System settings → Control → more ... → Hard
disks.
Loewe is not liable for any loss of data on the connected hard drive. To
prevent data loss, we recommend you save important recordings onto
a further additional external storage device.
(1 For device type bild 3.49 / bild 3.43.
(2 For device type bild 3.55 oled.
37192001_OM2_bild_3_43-55_2_00_ML_Buch.indb 19 37192001_OM2_bild_3_43-55_2_00_ML_Buch.indb 19

Possible installation options

You can use the following Loewe installation options listed for your
TV set.
Do not use any installation options that are not approved for your
TV set.
TV set Item number/name of the installation option:
bild 3.55 oled 72670x00 FS Plate 55_65
73190x00 floor stand 43-65
72115x80 WM 67
71363x00 WM Isoflex 32-55
71391x20 WM Slim / Vesa Size 300
bild 3.49 72660x00 FS Plate 32_49
73190x00 floor stand 43-65
72115x80 WM 67
71363x00 WM Isoflex 32-55
71389x00 WM Slim / Vesa Size 200
bild 3.43 72660x00 FS Plate 32_49
73190x00 floor stand 43-65
72435x00 FS 32_43 (formerly FS Connect 32-40)
72115x80 WM 67
71363x00 WM Isoflex 32-55
71389x00 WM Slim / Vesa Size 200

Conformity / Manufacturer's declaration

Loewe Technology hereby declares that this product
meets the essential
relevant provisions of Directive 2014/53/EU and all
applicable EU directives.
In the frequency range 5150 to 5350 MHz, this TV set is restricted to
indoor use in the following countries: Belgium, Bulgaria, Denmark,
Germany, Estonia, Finland, France, Greece, Ireland, Italy, Croatia,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Austria, Poland,
Portugal, Romania, Sweden, Slovakia, Slovenia, Spain, Czech Republic,
Hungary, United Kingdom, Cyprus.
You can find the complete declaration of conformity in the product
selection at:
www.loewe.tv/int/support

Imprint

Loewe Technology GmbH
Printed in Germany
Editorial date 03/2020-3.0 SB ©
Industriestraße 11
Loewe Technology GmbH, Kronach
D-96317 Kronach
www.loewe.tv
The information in this document is subject to change without
notice and does not constitute any obligation on the part of
Loewe Technology GmbH.
All rights including translation, technical modifications and errors
reserved.
requirements and other
19
20.05.2019 11:32:11 20.05.2019 11:32:11