Installing Image Mate 4 - Elmo MX-1 Manuel D'instructions

■INSTALLING IMAGE MATE 4

Install Image Mate 4 to your computer.
※Image Mate 4 can be downloaded from Elmo official website.
※If Image Mate 4 is already installed in your computer, update the version of Image Mate 4.
1．Access the following Elmo official website.
http://www.elmousa.com
2．Choose Image Mate 4.
3．Click "Download" and read the "Precautions on the handling of the downloaded data".
Click "Agree".
4. Downloading will start.
5．Run the downloaded file (ImageMate4Setup.msi) after the downloading is completed.
Follow the instructions displayed on the screen to install Image Mate 4.
6．The icon
Caution
・ Do not connect/disconnect the USB cable while operating the MX-1. It may cause
malfunction.
日
本 ・We recommend using the supplied USB cable.
語
・It may take some time to display the image after the resolution is changed via UVC (with
the USB cable). Do not turn off the power of the MX-1 or disconnect the USB cable
before the image is displayed.
・The displayed image may pause for a brief second when the object moves quickly. This
is not a malfunction.
・The displayed image may be distorted depending on the object. Reducing the resolution
or frame rate may improve the distortion of the image.
Note
• Depending on the computer's USB environment or the peripheral equipment, image
transfer may be disrupted.
• We do not guarantee the operation of all types of devices with the MX-1.
will be created on the desktop after the installation is completed.
42