Connecting To A Computer; Connecting To A Projector Or Monitor - Elmo MX-1 Manuel D'instructions

■CONNECTING TO A COMPUTER

The MX-1 is compliant to uvc (video class) standard. You can transfer the image via USB by
connecting the MX-1 to a computer using the USB3.0 cable (bus power)
①Connect the microB connector terminal of the USB3.0 cable to
side of the MX-1.
②Connect the typeA terminal of the USB3.0 cable to the USB port of your running computer.
③The MX-1 will be turned on after the connection is established.
Caution
・When connecting to the USB2.0 port, the frame rate may be decreased depending on the
output resolution.
・The frame rate may be decreased depending on the computer used.
■

CONNECTING TO A PROJECTOR OR MONITOR

By using the MX-1 CONNECT BOX, you can connect the MX-1 to a projector or monitor
without using a computer.
②
①
①Connect a projector or monitor to the MX-1 CONNECT BOX via the HDMI cable or RGB
cable.
②Connect the supplied DC power cable to
Then connect it to a wall outlet.
③Connect the MX-1 to the MX-1 CONNECT BOX via the supplied Expansion cable.
④The MX-1 and MX-1 CONNECT BOX will be powered on. （MX-1 of LED：blue）
①
②
. Connect the USB plug to the AC adapter.
39
.
③
connector in the
④
③
日
本
語
P.36