Pioneer MRX-5 Mode D'emploi page 25

standby, press and hold STANDBY/ON for at
least 3 seconds.
When the power of other units cannot
∫
be turned on with the app
To turn on Pioneer devices connected to the
same network as this unit using the app, you first
need to enable the network standby settings on
those devices.
When Wi-Fi settings with AUX
∫
connection aren't going well
If the volume of the device where the app is
installed is low or if sound effects are set to on, it
may not be possible to set properly. Try
increasing the volume or turn the sound effects
off.
When you cannot connect to a network
∫
via Wi-Fi
0 If this unit is connected by both an ethernet
cable and Wi-Fi to the access point, the
ethernet connection is prioritized. The
connection switches to Wi-Fi when you
disconnect the ethernet cable.
EN
( 4)
25