Start Time - Amprobe TR300 Mode D'emploi

• Key Start: 'hey' is displayed on the bottom of the screen. in this mode, the meter will start
recording when you press Start/Stop for more than 2 seconds.
from 'Stn' & 'p2', press SeT key
■ ■
press Up or Down key to select 'hey'
■ ■
press SeT to save and return to p2
■ ■
press MoDe to escape
■ ■
• immediately: '|nn' is displayed on the bottom of the screen. in this mode, the meter will
start recording immediately after you save the setting.
from 'Stn' & 'p2', press SeT key
■ ■
press Up or Down key to select '|nn''
■ ■
press SeT to save and return to p2
■ ■
press MoDe to escape and start recording.
■ ■
To stop the recording, press and hold Start/Stop for more than 2 seconds.
■ ■
• Schedule: 'SCh' is displayed on the bottom of the screen. in this mode, the meter will start
recording from the preset date and time.
from 'Stn' & 'p2', press SeT key
■ ■
press Up or Down key to select 'SCh''
■ ■
press SeT to save and return to p2
■ ■
press MoDe to escape
■ ■

Start Time:

• press SeT to enter the setting mode
• press Up or Down key to select 'Stt' & 'p3'
• press SeT to enter edit mode for year 'Yer'
• press Up or Down key to adjust the year
• press SeT to enter edit mode for month 'Mon'
• press Up or Down key to adjust the month
• press SeT to enter edit mode for day 'dAt'
• press Up or Down key to adjust the day
• press SeT again to enter the edit mode foe hour'Hor'
• press Up or Down key to adjust the hour
• press SeT again to enter the edit mode of minute'ni n'
• press Up or Down key to adjust the minute
• press SeT again to enter the edit mode for Second 'Sec'
• press Up or Down key to adjust the second
• press SeT to save the date and time
• press MoDe to quit
7