Introduction; Unpacking And Inspection; Operation; Setting Mode - Amprobe TR300 Mode D'emploi

INTRoDUCTIoN

The TR300 Temperature and humidity logger is well suitable to monitor indoor air quality. it
is designed with a wall-mounted hook in the back for easy installation. it has a very large LCD
display, an audible and visible alarm, and a quick response sensor to help monitor easily the
air temperature and humidity. it also has 16K memory capacity storage to record and save
continuous readings.
please read this manual thoroughly before operation. You will find it very easy to operate and
a valuable instrument to measure & record the air temperature & humidity.

UNPACkINg AND INSPECTIoN

The standard package of this product contains:
1 x TR300 meter
1 x instruction Manual
1 x Download Suite CD
1 x USb Cable
4 x AA battery

oPERATIoN

Turn oN and oFF the unit
• press START/STop pushbutton for less than 1 sec
• The display will show current temperature, humidity, the date and time in alternate fashion.
Setting Mode (See Fig 4 for Symbols meaning)
1. press SeT pushbutton to enter the setting mode or use the software program .
2. Use Up and Down pushbuttons to select from:
• Sample point: 'ptS' & 'p1' show on the display
• Start mode: Stn' and 'p2' show on the screen
• Start Time: 'Stt' & 'p3' show on the display
• Sample rate: 'Sr' & 'p4' show on the screen
• Alarm set: 'AL' & 'p5' show on the screen
• Real time: 'rtC' & 'p6' shown on the display
5