Schneider LD24-SCH13WHT Manuel D'utilisation page 58

How to access "Format Disk"?
1. Press the "MENU" button on the remote control to enter the OSD menu, then
press p /q button to select the "Feature" menu.
2. Press the ► button to enter the "feature" menu setting, use p /q to choose
"REC/Timeshift" setting as below:
Record File Format
Partiton Select
Picture
Timeshift Buffer
Sound
Channel
Recorder Start
Feature
Setup
Move
OK
3. Choose "Partition Select"
Partition List
Total Size: 001.8 G Free Size: 0001.8G
/udska1
Format Set Default Partition
Move
OK
a) Format partition: Press RED button to format the focus partition. Before
format, there is a prompted popup window to confirm；If format successfully
there is a message "Format Success!", otherwise, there is a "Format Fail!".
b) Set default partition: Press GREEN button to set the focus partition as the
default partition.
The recorders are stored in the default partition. It need to be reset if the
default partition is full in recording progress.
Recording a program by using a USB
This unit allows you to record your favorite DVB-T programs in a simple and
friendly way. You just need a USB key and insert it into the unit. The recording
will be made on the key and you can view the recordings later from this unit or
any other compatible multimedia devices.
Notes: Do not remove your USB stick while playback is in progress; otherwise
the content of your USB drive could be damaged. Press the STOP button to stop
playback and then remove your USB stick.
Feature - REC/Timeshift
Timer
Record List
Enter Exit
Exit
Enter
TS
Enter
Auto
Enter
Enter
Enter
Return
Menu
56